Industries
Electrical contractors
Asset register and map

Watch Tower · Applied Intelligence for your Business · Electrical contractors

An asset register and map for electrical contractors

The goal: Finish jobs on time and on budget, keep every crew safe around energized equipment, and keep code knowledge current.

Your sites, vehicles, equipment and people go into one asset register (Vulcan), imported from the files you already keep, and onto one map of the United States (Talos). Every asset has an owner, and every card and KPI can point to the asset it's about.

Open the free demo A fictional company in your industry, opened in the Console. No card needed.

What you see

Talos map in the Watch Tower Console

An illustration of the Talos map: sample job sites, a site boundary and a storm cell on a dotted map of the United States. — Every site, vehicle and machine on one map of the United States, with your region up close. An illustration with sample data. The demo opens a sample in your industry.

For owners, project managers and safety leads at electrical contracting firms

What it looks like for electrical contractors

The KPIs, cards and questions below are examples of what we set up with you. The names and units are made up.

KPIs, with the assumption behind each

Labor hours vs estimateHours booked against the estimate, per job.Assumption: From weekly time cards; travel time included.

Safety training currentElectricians with current lockout/tagout and electrical-safety training on file.Assumption: Training older than the company's refresher interval counts as lapsed.

Meters in calibrationTest meters with a current calibration date.Assumption: Calibration interval taken from the maker's recommendation.

Cards on the work tracker

Refresh lockout/tagout training for the two new apprenticesSafety lead · due Thu · Crew B
Send the overdue meters for calibrationTool room lead · due Wed · Meters 4, 9
Re-forecast labor on the warehouse job after the panel changeProject manager · due Fri · Job: Northgate warehouse

Records you already keep

Job-cost and labor reports
Lockout/tagout procedures and training records
Tool and meter calibration lists
Material orders

Assets in the register

Job sites
Vans and lifts
Meters and testing equipment
Electricians and their licenses

Questions your team can ask Bifrost

Which jobs are over their labor estimate, and by how much?
Whose safety training lapses in the next 30 days?
Which meters are past calibration?

Bifrost answers from the records in your own workspace and shows how each number was worked out.

How it runs

Asset register and map, step by step

Send the list you already keep: a spreadsheet of sites, units and equipment is enough to start.
We import it into the register and show you what's there and what's missing.
Your sites and assets go on one map, with an owner for each one from your organization chart.
Cards in the work tracker and KPIs on the brief point to the assets they're about, so you can follow a problem to the asset behind it.

The barriers this crosses

Use: What exactly would I use it for? We name the specific uses by role and by industry: the decision, the calculation, the plan, the brief.
Capability: How do I use it, what do I install, and who do I call? We curate the tools, set them up, teach them in plain language and stay reachable.

Rules and facts for electrical contractors

What the records have to show

OSHA's lockout/tagout standard requires employers to establish an energy control program, with written procedures and employee training, for servicing and maintenance where unexpected energization could cause injury.Source: 29 CFR 1910.147, The control of hazardous energy
The National Electrical Code (NFPA 70) is revised on a three-year cycle, and states and cities adopt editions on their own schedules.Source: NFPA 70, National Electrical Code

A summary for planning work, not legal advice. Check the source for the full rule and any state requirements.

Start

See it on a sample company first

Founding 10

$2,000 for setup and the first 3 months of Watch Tower, then $250/month. Ten places. We set up your team, goals and KPIs, asset register, map and work tracker with you, then review it with you every week.

Hardware implementation is quoted separately. Start with the demo; you can order from inside it.Open the free demo

Questions

Common questions

Can it hold our safety procedures?

It holds the actions and records around them: who's trained, what's due and which job it's for. Your written procedures stay where you keep them, linked from the cards.

Does the map show GPS positions from our trucks or machines?

Not yet. Positions on the map come from your records (addresses, yards, job sites and the locations you keep). Connected GPS tracking isn't released yet, and we'll say so plainly until it is.

What if our asset list is messy?

That's normal. We import what you have, then give you a written list of gaps, duplicates and assets with no owner, and fix it with you in week 3.

What does Watch Tower cost for electrical contractors?

Founding 10 covers setup and the first 3 months in one payment, then a monthly price; the numbers are on this page and on the pricing page inside the demo. Hardware implementation is quoted separately.

Asset register and map in other industries